Bibliography

M. P. Bendsøe and O. Sigmund. Topology Optimization: Theory, Methods, and Applications. 2nd Edition (Springer, 2003). SIMP method (Ch. 1), compliance minimization (§2.1), volume constraint (§2.1), chequerboard filtering (§3.4), thermal/heat conduction topology optimization (§1.3, §4.1).

A. Iga, S. Nishiwaki, K. Izui and M. Yoshimura. Topology optimization for thermal conductors considering design-dependent effects, including heat conduction and convection. International Journal of Heat and Mass Transfer 52, 2721–2732 (2009). Heat conduction topology optimization: SIMP for thermal conductivity, thermal compliance minimization.

M. P. Bendsøe and O. Sigmund. Material interpolation schemes in topology optimization. Archive of Applied Mechanics 69, 635–654 (1999). SIMP power-law interpolation, justification of the penalization exponent.

K.-J. Bathe. Finite Element Procedures (Prentice-Hall, 1996). Chapter 4.2: Plane Strain and Plane Stress Conditions. Chapter 9.3: Solution of Linearized Buckling Problems.

P. Duysinx and M. P. Bendsøe. Topology Optimization of Continuum Structures with Local Stress Constraints. International Journal for Numerical Methods in Engineering 43, 1453–1478 (1998). Stress criteria for porous/SIMP materials and epsilon-relaxation of local stress constraints in topology optimization.

C. Le, J. Norato, T. E. Bruns, C. Ha and D. A. Tortorelli. Stress-based topology optimization for continua. Structural and Multidisciplinary Optimization 41, 605–620 (2010). Relaxed stress rho^(1/2) sigma, regional p-norm stress measures with adaptive normalization; L-bracket benchmark.

M. Bruggi. On an alternative approach to stress constraints relaxation in topology optimization. Structural and Multidisciplinary Optimization 36, 125–141 (2008). The qp-approach: stress penalized with exponent q lower than the stiffness exponent p.

G. D. Cheng and X. Guo, ε-relaxed approach in structural topology optimization. Structural Optimization 13, 258–266 (1997), epsilon-relaxation of stress constraints to make singular optima accessible.

A. Verbart, M. Langelaar and F. van Keulen. A unified aggregation and relaxation approach for stress-constrained topology optimization. Structural and Multidisciplinary Optimization 55, 663–679 (2017). Review of relaxation and aggregation; unified approach in which lower-bound aggregation simultaneously relaxes the feasible domain.

G. Sved and Z. Ginos. Structural optimization under multiple loading. International Journal of Mechanical Sciences 10, 803–805 (1968). First observation of singular optima in stress-constrained (three-bar truss) optimization.

M. Stolpe and K. Svanberg. On the trajectories of the epsilon-relaxation approach for stress-constrained truss topology optimization. Structural and Multidisciplinary Optimization 21, 140–151 (2001). The global optimum of the epsilon-relaxed problem can be discontinuous in epsilon, so continuation on epsilon does not guarantee convergence to the true optimum.

H. P. Gavin. Geometric Stiffness Effects in 2D Trusses (2014). CEE 421L lecture notes, Duke University: truss geometric stiffness matrix, eqs. (3)–(4).

X. Huang and Y.-M. Xie. A further review of ESO type methods for topology optimization. Structural and Multidisciplinary Optimization 41, 671–683 (2010).

X. Liu, W.-J. Yi, Q. S. Li and P.-S. Shen. Genetic evolutionary structural optimization. Journal of Constructional Steel Research 64, 305–311 (2008).